Description

VERSATILE RADIO FOR AMATEUR AND COMMERCIAL USE

The ANILE-8R is certified for use on commercial and amateur frequencies. The ANILE-8R is FCC Certified for Part 90 usage and is able to Transmit and Receive fully on Narrowband (12.5kHz).

ACCURATE AND RELIABLE

The ANILE-8R is the most accurate and reliable radio in its class, with deviation at a minimum the ANILE-8R will only receive signals that you want. The ANILE-8R has an accurate receiver that will filter out any noise that is not on your chosen frequency or squelch setting. It out-ranks any other receiver in its class!

PRIORITY SCAN

The ANILE-8R has multiple options of priority scanning, never miss an important call again. While scanning through the channel bank you can select a priority channel to keep checking in, even if another channel receives a call.

GROUP AND INDIVIDUAL CALLING SUPPORTED

The ANILE-8R supports the most common Analog Tones. It supports CTCSS, DCS, and DTMF calling methods. Set-up your calling methods to call by individual or by group. Tone calling (private line) is required by most commercial applications and the ANILE-8R supports the latest standards, even allowing custom CTCSS Tones.

 

The ANILE-8R can even decode (receive) DTMF commands. This allows Remote Stun, Remote Kill and more.

INTERNAL VOX FUNCTION

The ANILE-8R has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation and can be used in conjunction with the included earpiece and mic. The VOX level and VOX delay time are adjustable your needs.

CUSTOMIZE YOUR OPERATION WITH CHANNELS, PROGRAMMABLE BUTTONS, AND MORE!

You can program your ANILE-8R exactly how you want it. There are 16 programmable memory channels. You can add or remove channels from being scanned. The side keys have functions programmable for both ‘short’ and ‘long’ key presses allowing up to 4 programmable options on two keys. The dual selector knob allows you to choose from one of 16 channels, with a secondary knob to control the volume. The radio has 2 power levels (5 watt maximum), allowing you to choose how far you can communicate and you can change the power level on the spot.  You can easily program from a PC to set-up the radio to operate exactly as needed.

 

Additional information

Frequency range

[TX] 136 – 174MHz or 400 – 520MHz
[RX] 136 – 174MHz or 400 – 520MHz

Channel Capacity

16 Channels

Channel Spacing

25KHz (wide band)12.5KHz (narrow band)

Sensitivity

≤0.25μV (wide band) ≤0.3μV (narrow band)

Operation Voltage

7.4V DC ±20%

Battery

1300mAh

Antenna

Antenna Connector: SMA-Female / Antenna Impedance: 50Ω

Accessory Connector

Kenwood 2 Pin Standard

Stability

±2.5ppm

Output power

5W / 1W

Size

127×60×35mm (with battery)

Weight

219g (with battery, antenna, belt clip)

Audio Power Output

1000mW/10% (1 WATT)